Aeco A1 is dynamic processor with three components: autogain, expander and compressor in one plugin. Components are routed after each other and can be re-routed. With combination of modules (Autogain and Compressor) you can create brickwall compression effect.

Autogain is component to automatically raise the audio signal to reference, and maintain constant audio output. Expander is opposite to compressor where audio is expanded instead compressed. Compressor in Aeco A1 is soft-knee compressor.

Aeco A1 dynamic processor Screenshot 1

News

5.10.2020 Version: 1.1.0
added: online check for updates

Features

  • Autogain

    • reference: values from 0 to -60 decibels.
    • maximum: values from 0 to 60 decibels.
    • envelope attack: values from 0.02 to 1000 ms
    • envelope release: values from 1 to 1000 ms
    • dry and wet for audio signal. Values from -120 to +6
  • Expander

    • threshold: values from 0 to -60 decibels.
    • ratio: values from 1 : 1 to 1 : 10.
    • envelope attack: values from 0.02 to 1000 ms
    • envelope release: values from 1 to 1000 ms
    • dry and wet for audio signal. Values from -120 to +6
  • Compressor

    • threshold: values from 0 to -60 decibels.
    • ratio: values from 1 : 1 to 10 : 1.
    • soft knee: values form 0 to -60 decibels.
    • make-up: values from -60 to +60 decibels.
    • envelope attack: values from 0.02 to 1000 ms
    • envelope release: values from 1 to 1000 ms
    • dry and wet for audio signal. Values from -120 to +6
  • Routing components

    Audio signal of the components can be re-routed. For example, a signal can be re-routed to Compressor >> Autogain >> Expander.